cui .com date 02/23/2012 page 1 of 3 series: md-xxsg description: mini din connector features ? pcb mount ? fully shielded ? right angle ? ground tabs rohs md - xx sg base number part number key specifications parameter conditions/description min typ max units rated input voltage 100 12 vac vdc rated input current at 100 vac at 12 vdc 1 2 a a contact resistance 30 m insulation resistance at 250 vdc 50 m voltage withstand for 1 minute 250 vac insertion force 1 4.5 kg withdrawl force 0.8 3 kg operating temperature -40 85 c life 1,000 cycles pin options 30 = 3 pins 40 = 4 pins 50 = 5 pins 60 = 6 pins 80 = 8 pins
cui .com cui inc series: md-xxsg description: mini din connector date 02/23/2012 page 2 of 3 mechanical drawings units: mm[inches] tolerance: 0.2mm material plating earth terminal brass tin contact terminals (1~8) phosphor bronze silver housing pbt 0.9 0.04 (5 plcs) 0.53 13.5 0.19 4.7 0.33 (3 plcs) 8.5 0.22 (2 plcs) 5.5 0.43 (2 plcs) 6.8 0.27 11.0 1.3 0.05 4 13 2 0.7x2.2 (3 plcs) 5 pcb layout top view (2 plcs) 0.53 13.5 0.19 4.7 0.33 (2 plcs) 8.5 0.22 (2 plcs) 5.5 0.43 11.0 6.8 0.27 0.9 (4 plcs) 3 12 0.7x2.2 (3 plcs) 4 pcb layout top view 6.8 0.27 0.53 13.5 0.19 4.7 0.33 (2 plcs) 8.5 0.22 (2 plcs) 0.43 11.0 0.04 0.9 5.5 0.9 0.04 (3 plcs) 1 3 0.7x2.2 (3 plcs) 2 pcb layout top view 4 5 2 3 1 3 4 21 3 21 md-30sg md-40sg md-50sg 3.7 0.15 0.33 8.5 0.43 11.0 4.7 0.19 543 1 6 7 8 2 3.5 14.1 0.56 13.0 0.51 0.01 (typ) 0.26 6.5 0.14 0.3 0.3 0.01 0.08 2.0 (3 plcs) 0.7 0.03 (8 plcs) 0.22 5.5 13.2 0.52 0.3 0.01 0.3 0.01 (8 plcs)
cui inc series: md-xxsg description: mini din connector date 02/23/2012 page 3 of 3 cui offers a one (1) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to b e accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use . cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 02/23/2006 1.01 new template applied 02/23/2012 the revision history provided is for informational purposes only and is believed to be accurate. revision history MD-60SG md-80sg 0.9 0.04 0.53 13.5 0.9 0.04 (8 plcs) 0.33 (4 plcs) 8.5 0.22 (2 plcs) 5.5 0.43 (4 plcs) 0.27 6.8 0.10 2.6 11.0 4.7 0.19 7 2 64 5 31 0.7x2.2 (3 plcs) 8 pcb layout top view 3 1 6 7 8 54 2 5 6 3 1 4 2 2.6 0.10 0.53 13.5 0.19 4.7 0.33 (4 plcs) 8.5 0.22 (2 plcs) 5.5 0.43 (2 plcs) 0.27 6.8 11.0 0.9 0.04 (6 plcs) 4 5 3 12 0.7x2.2 (3 plcs) 6 pcb layout top view
|
